Ardob - Core Chucks

Core Chucks

DF–2000 Torque-Activated Shaftless Core Chucks Automatic torque activation – no side force needed. Rolling friction inside the chuck ensures tight core grip in low or high tension applications. Rolls can be run to the last wrap – no wasted web material. Concentric expansion minimizes roll bounce and vibration. Smooth jaws grip the core without damaging the core. Core chuck won't damage core ID's so cores can be reused. Step chuck accommodates different core sizes with no effort. Adapters and quick-disconnect core chucks also available for multiple core sizes. "Core Kicker" models automatically eject cores from chuck. Download brochure pdf Quote Request
DF-1000 Torque-Activated, Shaft-Mounted Core Chucks Replaces antiquated and labor intensive “knock-in” cones, wedges, and manual core chucks. Mounts on a through shaft, with a retractable roll collar supporting the roll at the opposite end. For 3" cores (larger core sizes use DF-2000 through-shaft chucks). No tools required for quick, 30-second roll changes. Automatic, concentric expansion (activated by torque). Download brochure pdf Quote Request
UC-3000 Air-Inflated Bladder Core Chucks Chucks mount on a core shaft to adapt to various core sizes. Easy air inflation – chucks can be connected with an air hose to allow both chucks to be inflated at the same time. Ardob's unique polyurethane bladder resists abrasion, knife cuts, and stretching. Less bladder stretching means easy insertion and removal from cores. Lighter than other air chuck adpaters (usually 30% -50%). Available for core sizes ranging from 3 inches up. Download brochure pdf Quote Request
LC-1000 Latching Roller Core Chucks Perfect for form, fill, and seal packaging, window patching envelopes, as well as tag, tape, and label production. Easy roll changes in no time....without tools. A simple twist locks the core in place, and a twist in the other direction unlatches the roll. Mount in horizontal or vertical positions, cantilevered or on a through-shaft. Download brochure pdf Quote Request
DF 500 Core Chuck for Differential Rewinding The DF500 is used for differential rewinding applications to better control the rewinded matirial tension, providing a constant grip inside the core. A short rotation engage the chuck inside the cores, the rotation in the opposite direction open the chuck during roll change over. Suitabkle for 3" and 6" ID cores only. Download brochure pdf
PC–4000 Pneumatic/Mechanical Positive Grip Shaftless Core Chucks Constant-grip operation. Cores won't get stuck on the chuck because of positive lug retraction. Consistent grip force regardless of torque magnitude or direction. Slide-on adapters make changing among core sizes quick and easy.